Oelpumpe

[voodoodick]

habe das auf internet gefunden, hat jemand hier die Anderung gemacht? Ist das auch zu machen auf eine 1985 34L? \r\n\r\n********************\r\nfirst and main: oilpump!\r\nthe oilpump (to be correct: there are two pumps in one housing, one to bring back the oil from the dry sump to the oiltank and one to lubricate camshaft, piston, \r\ncrankshaft etc.) is a bit weak, there are reports about piston-problems (overheating) because of that.\r\nrecommondation: change against the actual pump (first used in tenere 3AJ, '88 model until today in every xt/tt600 model). the haul capacity is double compared to the \r\nold one. here is a pic of the pump:http://www.xt600.de/xt_schraubertips...e_1vj_expl.jpg. you can identify the actual pump by the two grooves to be found on the outside end of the drive axle (pic shows 86-87 model's pump: \r\none groove, haul: 50% more). important: you have to change also the plastic sprocket against the new one since the drive axle is longer! don't forget paper-gasket and \r\ntwo o-rings.